Merry Christmas faux glitter 12in x 7.5in (DTF print only)

DTF Transfer Instructions
Pressing Instructions
1. Set Heat Press:- Temperature: 300–320°F - Pressure: Medium–Firm- Time: 10–15 seconds
2. Pre-Press the Garment:- Press for 5 seconds to remove moisture and wrinkles.- Ensure the surface is smooth.
3. Place the Transfer:- Position the DTF print ink-side down, film-side up.- Use heat-resistant tape if needed.
4. Press the Transfer:- Press for 10–15 seconds with firm pressure.
5. Peel the Film:- COOL peel only. Allow the print to cool completely.
6. Final Press (Recommended):- Cover with Teflon, parchment, or kraft paper.- Press for another 5–10 seconds.
Washing & Care Instructions- Wash inside out, cold water, gentle cycle.- Air dry or tumble dry low.- No bleach or fabric softeners.- Do not iron directly on the print.
Important Notes- Must be applied with a heat press (not a household iron).- Press settings may vary depending on your press.